Huawei MA5683T OLT
$1 700
48.450Грн.
Huawei SmartAX MA5683T - платформа для построения оптического линейного терминала (OLT) увеличенной емкости, позволяющая предоставлять GPON, EPON и P2P сервисы по пассивным оптическим сетям. Поддерживает установку до 6-ти сервисных плат (позволяет подключить до 12 000 GPON абонентов), 2-х плат управления с функцией резервирования и 2-х Uplink плат.
Описание
Возможности платформы MA5683T:
- поддержка сервисных плат GPON, EPON и P2P;
- 2 слота для плат контроля с функцией резервирования;
- 2 слота для Uplink карт ( c поддержкой GE портов GICF uplink card, 10GE портов X2CS uplink card );
- 6 слотов для сервисных плат (с поддержкой GPON карт: GPBD 8 GPON порта, GPFD 16 GPON портов, EPFD 16 EPON портов);
- подключение до 128-ми GPON абонентов на 1 порт;
- подключение до 64-х EPON абонентов на 1 порт;
- скорость канала до 2,5 Гбит/с к абоненту (G.984), 1,25 Гбит/с от абонента;
- максимальная дальность PON линии - до 20 км.;
- гибкое наращивание количества абонентов посредством установки плат различной емкости (8+8PON, 8+16PON, 16+16PON);
- поддержка Ethernet коммутации Layer 2, Layer 3;
- поддержка QoS;
- контроль оптических параметров линии как со стороны абонента (ONU) так и со стороны головной станции (OLT);
- управление пропускной способностью (based on the port, MAC address, IP address, TCP port ID, or UDP port ID);
- защита от the DoS (denial of service) атак;
- контроль доступа по MAC (media access control) адресам;
- Anti-ICMP/IP packet attack, source address routing filtering, blacklist.
Конфигурация шасси MA5683T:
- 6 слотов Service Board (PON порты);
- 2 слота Control Board;
- 2 слота Uplink Board (GIU);
- 2 слота Power Board;
- 1 универсальный слот (GPIO);
- 1 слот FAN block.
Технические характеристики MA5683T:
- 19’’ дюймовый форм фактор;
- высота 6U;
- питание DC: -38,4..-72 V;
- размер 482.60 мм. x 283.20 мм. x 263.90 мм.;
- вес 7,0 кг. (пустое шасси);
- максимальная потребляемая мощность - 810 W (H802SCUN*2 шт.+H801X2CS *2 шт.+H801CITD +H801PRTE*2 шт.+H801FCBI +H802OPGD*6 шт.).
MA5683T Specification and Datasheet
| System performance | |
| Backplane bus switching capacity | 1.5 Tbit/s |
| System L2 packet forwarding rate | SCUB: 72 Mpps |
| SCUN: 726 Mpps(Active/Standby mode), 1452 Mpps(Load-sharing mode) | |
| SCUF: 190 Mpps | |
| SCUH: 1428 Mpps(Active/Standby mode), 2856 Mpps(Load-sharing mode) | |
| Control board switching capacity | SCUB: 48 Gbit/s |
| SCUN: 480 Gbit/s(Active/Standby mode), 960Gbit/s(Load-sharing mode) | |
| SCUF: 128 Gbit/s | |
| SCUH: 960 Gbit/s(Active/Standby mode), 1920Gbit/s(Load-sharing mode) | |
| Switching/Forwarding delay | Short forwarding delay: The 100 Mbit/s Ethernet port sends the 64-byte Ethernet packets at a delay shorter than 20 μs. |
| BER in full load | BER of port when transmitting data in full load < 10 e-7 |
| System performance | |
| System | Redundant configuration |
| System availability in typical configuration | >99.999% |
| Mean Time Between Failures (year) | ≈45 |
| Configuration | |
| Maintenance port | Number of 10 Mbit/s/100 Mbit/s maintenance Ethernet ports: 1 |
| Number of serial ports for local/remote maintenance: 1 | |
| Monitoring port | Number of environment monitoring serial ports: 1 |
| Maximum number of GPON ports in a subrack | 96 |
| Maximum number of 10G GPON ports in a subrack | 24 |
| Maximum number of P2P FE ports in a subrack | 288 |
| Maximum number of P2P GE ports in a subrack | 288 |
| Maximum number of upstream ports (GE ports in the GIU slot) in a subrack | 8 |
| Maximum number of upstream ports (10GE ports in the GIU slot) in a subrack | 4 |
| Management ports | |
| Outband management Ethernet port (RJ-45) | SCUB/SCUN/SCUF/SCUH control board: 1 Port Per Board |
| Local serial port (Console) | SCUB/SCUN/SCUF/SCUH control board: 1 Port Per Board |
| Upstream ports | |
| GE electrical port | GICE: 4 Ports Per Board |
| GICG: 2 Ports Per Board | |
| GE optical port | GICF/GICK: 2 Ports Per Board |
| SCUB/SCUN/SCUH/GICD/GSCA: 4 Ports Per Board | |
| ETHB/SPUA/SPUF: 8 Ports Per Board | |
| SPUC: 40 Ports Per Board | |
| 10GE optical port | X2CS/SPUA: 2 Ports Per Board |
| SPUC: 4 Ports Per Board | |
| SPUF: 8 Ports Per Board | |
| E1 port | TOPA: 16 Ports Per Board |
| STM-1 upstream optical port | TOPA: 2 Ports Per Board |
| PON upstream optical port | P2CA: 2 Ports Per Board (One PON port is available and the other is backup.) |
| Service ports | |
| GPON port | GPBD/GPBH: 8 Ports Per Board |
| GPFD: 16 Ports Per Board | |
| 10G GPON port | XGBC: 4 Ports Per Board |
| XGBD: 8 Ports Per Board | |
| P2P GE optical port | OPGD/OPGE: Single-fiber bi-directional: 48 Ports Per Board, Two-fiber bi-directional: 24 Ports Per Board |
| P2P FE optical port | OPFA: 16 Ports Per Board |
| OPGD/OPGE: Single-fiber bi-directional: 48 Ports Per Board, Two-fiber bi-directional: 24 Ports Per Board | |
| Ethernet optical port | ETHB: 8 Ports Per Board |
| E1 port | H802EDTB: 16 Ports Per Board |
| Device Specifications | |
| Dimensions (W x D x H, excluding mounting brackets) | 442.00 mm x 283.20 mm x 263.90 mm |
| Dimensions (W x D x H, including mounting brackets) | 535.00 mm x 283.20 mm x 263.90 mm, for ETSI cabinet |
| 482.60 mm x 283.20 mm x 263.90 mm, for IEC cabinet | |
| Weight (empty chassis) | 7.0kg |
| Working environment temperature | For an indoor cabinet Configured with 1 subrack: -25°C to +65°C Configured with 2 subracks: -25°C to +55°C |
| Working environment humidity | 5% RH to 95% RH |
| Atmosphere pressure | 61 kPa to 106 kPa |
| Altitude | < 4000 m |
| Board | GPON Type | Port Quantity | Optical Module | Maximum Split Ratio | ONU based shaping |
| H802GPBD | 1G-GPON | 8 | SFP (Class B+ and Class C+) | 1:128 | No |
| H805GPBD/H806GPBD | 1G-GPON | 8 | SFP (Class B+ and Class C+) | 1:128 | Yes |
| H802GPFD/H803GPFD/H805GPFD | 1G-GPON | 16 | SFP (Class B+ and Class C+) | 1:128 | Yes |
| H806GPBH/H807GPBH | 1G-GPON | 8 | SFP (Class B+ and Class C+) | 1:128 | Yes |
| H802XGBC | 10G-GPON | 4 | XFP | 1:128 | Yes |
difference between different Uplink board
| Board | Redundancy Backup | Port | ||||
| CONSOLE/ESC | ETH | BITS/TOD | ALARM IN/OUT | Upstream port | ||
| H801MCUD | Active/standby mode Load-sharing mode |
Yes | Yes | No | Yes | Yes(four GE ports: GE0/GE1/GE2/GE3) |
| H801MCUD1 | Active/standby mode Load-sharing mode |
Yes | Yes | Yes | Yes | Yes(two GE ports: GE0/GE1: two GE/10 GE ports: 10GE0/GE2 and 10GE1/GE3) |
difference between GPON B+ and C+ GPON transceiver
| B+ Module | C+ Module | |
| Type | One-fiber bi-directional optical module, class B+ | One-fiber bi-directional optical module, class C+ |
| Operating Wavelength | Tx: 1490 nm Rx: 1310 nm |
Tx: 1490 nm Rx: 1310 nm |
| Encapsulation Type | SFP | SFP |
| Port Rate | Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s |
Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s |
| Minimum Output Optical Power | 1.50 dBm | 3.00 dBm |
| Maximum Output Optical Power | 5.00 dBm | 7.00 dBm |
| Maximum Receiver Sensitivity | -28.00 dBm | -32.00 dBm |
| Optical Connector Type | SC/PC | SC/PC |
| Optical Fiber Type | Single-mode | Single-mode |
| Reach | 20.00 km | 20.00 km |
| Overload Optical Power | -8.0 dBm | -12.0 dBm |
| Extinction Ratio | 8.2 dB | 8.2 dB |
Характеристики
Линейные терминалы(OLT)
SmarAX MA5683T
Отзывы покупателей
Пока нет ни одного отзыва. Оставьте отзыв первым